Kaka slag remover(K-34#) K seriesslag remover is a special and efficient for casting product imported byKAGALITE co., LTD. In Japan. Scope of application Castiron/ductile iron/gray iron Product parameters
product name | Particle size(micron) | mesh number | moisture(%) | Net Weight(kg) | K-0 | 4750-2360 | 4-7.5 | ≦5 | 20(Kraft bag) | K-1 | 2360-1180 | 7.5-14 | ≦1 | K-2 | 1180-600 | 11-26 | ≦0.5 | K-3M | 600-300 | 36-50 | K-4M | 300-63 | 50-235 | K-34 | 500-75 | 30-200 |
Advantages A. Low addition amount, strong slag gathering ability, easyto remove crusting; B. The slag is brittle and non-stick;Improve the lininglife of furnace lining; C. Small specific gravity, large expansion coefficient,good covering and heat preservation, low temperature drop when handling liquidmetal; D. Effectively cover the metal liquid surface and reducethe oxidation of alloying elements during smelting; E. Do not change the metal composition, do not pollute themetal liquid; F. Smokeless and dust-free when using, keep the workshopenvironment clean. Instructions 1. In the smelting process of the electric furnace, afterthe metal has been molten, a small amount of slag remover is sprinkled on thesurface of the metal water for preliminary slag removal, and then a thin layeris sprinkled on the surface of the liquid metal to play the role of heatpreservation and slag accumulation, and the slag is scraped before coming outof the furnace. 2. Sprinkle a little slag remover at the bottom of theladle before the molten steel comes out of the water. 3. The total amount added is about 0.2% of the weight ofthe meta liquidl.
|